Use the same procedure for LHD and RHD vehicles.
The procedure described below is for the LHD vehicles.
81260
1.INSTALL GLOVE BOX LIGHT ASSEMBLY
|
Turn |
Turn the glove box light assembly as shown in the illustration and install it.
55433B
2.INSTALL NO. 2 INSTRUMENT PANEL LOWER FINISH PANEL
55054
3.INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY
55550
4.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
55607
5.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
62111C
6.INSTALL COWL SIDE TRIM BOARD RH
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX>INSTALLATION
67913
7.INSTALL FRONT DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>REAR CONSOLE BOX>INSTALLATION
8.INSTALL REAR CONSOLE BOX ASSEMBLY