Use the same procedure for LHD and RHD vehicles.
The procedure described below is for the LHD vehicles.
67914
1.REMOVE FRONT DOOR SCUFF PLATE LH
62112
2.REMOVE COWL SIDE TRIM BOARD LH
55606
3.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55470
4.REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY
55434B
5.REMOVE INSTRUMENT PANEL LOWER CENTER FINISH PANEL
55440D
6.REMOVE INSTRUMENT PANEL BOX ASSEMBLY
33504F
7.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
58804A
8.REMOVE CONSOLE UPPER PANEL SUB-ASSEMBLY
55618A
9.REMOVE CONSOLE BOX CUP HOLDER
55619F
10.REMOVE NO. 2 CONSOLE BOX CUP HOLDER
55475E
11.REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
Remove in this Direction |
Disengage the claws to remove the instrument cluster finish panel garnish as shown in the illustration.
55475E
12.REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER GARNISH
|
Remove in this Direction |
Disengage the claws to remove the instrument cluster finish panel center garnish as shown in the illustration.