55475E
1.INSPECT INSTRUMENT CLUSTER FINISH PANEL GARNISH
| *a | Component without harness connected (Instrument Cluster Finish Panel Garnish) |
Check that the LED illuminates.
Apply auxiliary battery voltage to the instrument cluster finish panel garnish and check that the LED illuminates.
| Measurement Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → 2 (B)
Auxiliary battery negative (-) → 1 (E) |
LED illuminates |
If the result is not as specified, replace the instrument cluster finish panel garnish.
55475E
2.INSPECT INSTRUMENT CLUSTER FINISH PANEL CENTER GARNISH
| *a | Component without harness connected (Instrument Cluster Finish Panel Center Garnish) |
Check that the LED illuminates.
Apply auxiliary battery voltage to the instrument cluster finish panel center garnish and check that the LED illuminates.
| Measurement Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → 2 (B)
Auxiliary battery negative (-) → 1 (E) |
LED illuminates |
If the result is not as specified, replace the instrument cluster finish panel center garnish.