Home › Vehicle Interior › LIGHTING (INT) › AMBIENT LIGHT
RM32K0E _58 Vehicle Interior _062037 LIGHTING (INT) _0302288 AMBIENT LIGHT G

LIGHTING (INT)  AMBIENT LIGHT  INSPECTION  


PROCEDURE

Hide 81080S 1.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH

a.
E273489C07
1.781,1.708 1.948,1.26 true 2.302,1.719 2.125,1.271 true 0.385,0.302 0.813,0.625 0.427,0.323 10 false *a 2.323,1.74 2.479,1.938 0.156,0.198 10 false + 1.719,1.719 1.875,1.917 0.156,0.198 10 false -
*a Component without harness connected
(No. 1 Interior Illumination Light Assembly LH)


Check that the LED illuminates.

i.

Apply auxiliary battery voltage to the No. 1 interior illumination light assembly LH and check that the LED illuminates.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → 1 (+)
Auxiliary battery negative (-) → 2 (-)
LED illuminates


If the result is not as specified, replace the No. 1 interior illumination light assembly LH.



Hide 81080P 2.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH

a.
E273489C07
1.781,1.708 1.948,1.26 true 2.302,1.719 2.125,1.271 true 0.385,0.302 0.813,0.625 0.427,0.323 10 false *a 2.323,1.74 2.479,1.938 0.156,0.198 10 false + 1.719,1.719 1.875,1.917 0.156,0.198 10 false -
*a Component without harness connected
(No. 1 Interior Illumination Light Assembly RH)


Check that the LED illuminates.

i.

Apply auxiliary battery voltage to the No. 1 interior illumination light assembly RH and check that the LED illuminates.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → 1 (+)
Auxiliary battery negative (-) → 2 (-)
LED illuminates


If the result is not as specified, replace the No. 1 interior illumination light assembly RH.