69350
1.INSPECT BACK DOOR LOCK ASSEMBLY
| *a | Component without harness connected
(Back Door Lock Assembly) |
| *b | Lock |
| *c | Unlock |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 (ACT-) - 3 (D+) | Unlocked | Below 1 Ω |
| 2 (ACT-) - 3 (D+) | Locked | 10 kΩ or higher |
If the result is not as specified, replace the back door lock assembly.