Home › Vehicle Exterior › WINDOW / GLASS › RELAY
RM32K0E _59 Vehicle Exterior _061311 WINDOW / GLASS _0302416 RELAY G

WINDOW / GLASS  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85912 1.INSPECT DEFOGGER RELAY

a.

Check the resistance.

i.
E223161

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Auxiliary battery voltage applied to terminals 1 and 2 10 kΩ or higher
3 - 4 Auxiliary battery voltage not applied between terminals Below 1 Ω
3 - 5 Auxiliary battery voltage applied to terminals 1 and 2 Below 1 Ω
3 - 5 Auxiliary battery voltage not applied between terminals 10 kΩ or higher
4 - 5 Always 10 kΩ or higher


If the result is not as specified, replace the defogger relay.