Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER (for Radio and Display Type) › 2016.10–2019.09
RM32K0E _56 Audio / Visual / Telematics _061817 AUDIO / VIDEO _0303529 RADIO RECEIVER(for Radio and Display Type) A

AUDIO / VIDEO  RADIO RECEIVER(for Radio and Display Type)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 55470 1.REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

Hide 55406B 2.REMOVE INSTRUMENT CLUSTER FINISH LOWER CENTER PANEL SUB-ASSEMBLY

Hide 55670A 3.REMOVE INSTRUMENT PANEL CENTER REGISTER ASSEMBLY

Hide 86140A 4.REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

a.
E362283

Remove the 4 screws.


b.
E362284C01
0,0 0,0 false
V113147

Remove in this Direction


Pull the radio and display receiver assembly with bracket toward the rear of the vehicle to disengage the claws and clips as shown in the illustration.


c.

Disconnect each connector and remove the radio and display receiver assembly with bracket.


Hide 86211J 5.REMOVE NO. 1 RADIO RECEIVER BRACKET

a.
E362285

Remove the 2 screws and No. 1 radio receiver bracket from the radio and display receiver assembly.


Hide 86212C 6.REMOVE NO. 2 RADIO RECEIVER BRACKET

a.
E362286

Remove the 2 screws and No. 2 radio receiver bracket from the radio and display receiver assembly.