Be sure to correctly follow the removal and installation procedures for the seat position airbag sensor.
89178A
1.INSPECT SEAT POSITION AIRBAG SENSOR (for Vehicle not Involved in Collision)
Perform a diagnostic system check.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR
89178A
2.INSPECT SEAT POSITION AIRBAG SENSOR (for Vehicle Involved in Collision)
Perform a diagnostic system check.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR
Visually check for defects with the seat position airbag sensor removed from the vehicle.
The defects are as follows:
Cracks in the sensor housing
Dents in the sensor housing
Chips in the sensor housing
Cracks or other damage to the connector
No defects are found.
If any defects are found, replace the seat position airbag sensor with a new one.