Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG CUT-OFF INDICATOR LIGHT
RM32K0E _58 Vehicle Interior _062267 SUPPLEMENTAL RESTRAINT SYSTEMS _0303884 AIRBAG CUT-OFF INDICATOR LIGHT G

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG CUT-OFF INDICATOR LIGHT  INSPECTION  


PROCEDURE

Hide 83910G 1.INSPECT AIRBAG CUT-OFF INDICATOR LIGHT (CLOCK ASSEMBLY)

a.

Check illumination.

i.
B460512C01
1.438,0.781 1.771,0.781 true 1.458,1.115 1.792,1.115 true 1.594,1.375 1.927,1.375 true 1.313,3.542 1.792,3.938 true 2.167,3.563 1.99,3.927 true 2.771,3.781 2.385,4.01 true 1.833,0.646 2.146,0.844 0.313,0.198 10 false *c 1.865,1 2.177,1.198 0.313,0.198 10 false *d 1.979,1.26 2.292,1.458 0.313,0.198 10 false *b 0.354,3.5 0.667,3.698 0.313,0.198 10 false *a 0.875,3.458 1.354,3.708 0.479,0.25 10 false PAON 2.229,3.458 2.708,3.708 0.479,0.25 10 false P-AB 2.865,3.688 3.344,3.938 0.479,0.25 10 false IG+
*a Component without harness connected
(Airbag Cut-off Indicator Light (Clock Assembly))
*b Front Passenger Airbag Indicator
*c Airbag ON Indicator
*d Airbag OFF Indicator


Apply auxiliary battery voltage to the airbag cut-off indicator light (clock assembly) and check that it illuminates.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1 (IG+)
Auxiliary battery negative (-) → Terminal 3 (P-AB)
Front Passenger Airbag indicator illuminates
Airbag OFF indicator illuminates
Auxiliary battery positive (+) → Terminal 1 (IG+)
Auxiliary battery negative (-) → Terminal 4 (PAON)
Front Passenger Airbag indicator illuminates
Airbag ON indicator illuminates


If the result is not as specified, replace the airbag cut-off indicator light (clock assembly).