1.CUSTOMIZE LIGHTING SYSTEM (INT)
Customizing using the GTS
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Utility / Customize / Illuminated Entry.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Lighting Time | Changes the lighting time of the following lights that are operated by the timer function when the DOOR switch of the map light assembly is on:
·
Map Light Assembly ·
No. 1 Room Light Assembly ·
No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*1 ·
Instrument Cluster Finish Panel Garnish (Cup holder Illumination Light)*1 |
15 s | 10:30 s,00:15 s,01:7.5 s | Main body ECU (Multiplex network body ECU) |
| I/L when ACC OFF | Turns off the following lights automatically when the door switch of the map light assembly is on and the power switch is turned from on (ACC or IG) to off:
·
Map Light Assembly ·
No. 1 Room Light Assembly |
ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| I/L ON W/Door Key Unlock | Turns on the following lights automatically when the door switch of the map light assembly is on and the doors are unlocked by an unlock operation (key-linked, wireless or entry unlock function):
·
Map Light Assembly ·
No. 1 Room Light Assembly ·
No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*1 ·
Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*1 |
ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Room Light when Aprchd | Turns on the following lights when the door switch of the map light assembly is on and the electrical key transmitter sub-assembly is brought near the vehicle (*2):
·
Map Light Assembly ·
No. 1 Room Light Assembly |
ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Light Control | Dims the following lights when the power switch is on (IG) and the shift lever is moved to any position other than P:
·
No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*1 ·
Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*1 |
ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Interior Light Control | Turns on the following lights:
·
Map Light Assembly ·
No. 1 Room Light Assembly |
ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Interior Illumination Light | Turns on the following lights:
·
No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*1 ·
Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*1 |
ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
*1: w/ Door Ambient Illumination Light
*2: w/ Entry Function
Customizing using the multi-display
Turn the power switch on (IG).
Enter the following menus: MENU / Setup / Vehicle / Vehicle Customisation / Lights Settings.
Select the setting by referring to the table below:
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Interior lights off timer | 15 sec. | Changes the lighting time of the following lights that are operated by the timer function when the door switch of the map light assembly is on:
·
Map Light Assembly ·
No. 1 Room Light Assembly ·
No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*1 ·
Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*1 |
Off, 15 sec., 7.5 sec. or 30 sec. | Main body ECU (Multiplex network body ECU) |
*1: w/ Door Ambient Illumination Light