Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY(for RH Side)
RM32K0E _58 Vehicle Interior _062271 SEAT BELT _0303949 REAR SEAT INNER BELT ASSEMBLY(for RH Side) G

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for RH Side)  INSPECTION  


PROCEDURE

Hide 73380A 1.INSPECT REAR SEAT INNER BELT ASSEMBLY (w/ Seat Belt Warning System)

a.

Check the resistance.

i.
B276694C48
1.5,0.25 1.917,0.5 0.417,0.25 0.99,1.823 1.333,1.229 true 1.844,1.813 1.563,1.219 true 0.188,0.135 0.479,0.469 0.292,0.333 10 false *a 1.583,0.302 2.042,0.5 0.458,0.198 10 false M31 0.792,1.875 1.25,2.073 0.458,0.198 10 false RBR+ 1.729,1.875 2.188,2.073 0.458,0.198 10 false RBR-
*a Component without harness connected
(Rear Seat Inner Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
M31-5 (RBR+) - M31-4 (RBR-) Rear seat inner belt assembly unfastened Below 1 Ω
Rear seat inner belt assembly fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner belt assembly.