Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY › 2016.10–2019.09
RM32K0E _58 Vehicle Interior _062271 SEAT BELT _0303955 FRONT SEAT INNER BELT ASSEMBLY A

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the driver side and front passenger side.

·

The procedure listed below is for the driver side.



PROCEDURE

Hide 73240 1.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

a.

Install the front seat belt anchor plate.


b.

w/ Vertical Adjuster:

i.
B458414C01
1.375,3.052 1.604,2.781 true 1.188,3.073 1.396,3.281 0.208,0.208 10 true *a
*a Protruding Part


Install the front seat inner belt assembly with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster assembly.



ii.

Engage the clamps.



c.

w/o Vertical Adjuster:

i.
B458415C01
1.344,2.969 1.594,2.719 true 1.167,3 1.396,3.198 0.229,0.198 10 true *a
*a Protruding Part


Install the front seat inner belt assembly with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster assembly.



ii.

Engage the clamp.



d.
B458462

Engage the claw and clamp.


Hide 73230 2.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

a.

Install the front seat belt anchor plate.


b.
B458416C01
2.125,2.896 1.948,2.729 true 2.188,2.875 2.396,3.073 0.208,0.198 10 true *a
*a Protruding Part


Install the front seat inner belt assembly with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster assembly.


i.

Engage the clamp.



c.
B458463

Engage the claw and clamps.


d.

Connect the connector.


Hide 3.INSTALL FRONT SEAT ASSEMBLY