Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY › 2016.10–2019.09
RM32K0E _58 Vehicle Interior _062271 SEAT BELT _0303955 FRONT SEAT INNER BELT ASSEMBLY G

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73240 1.INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

a.
B276694C46
0.917,0.24 1.417,0.49 0.5,0.25 1.917,0.25 2.417,0.5 0.5,0.25 1.49,1.875 1.677,1.219 true 2.219,1.854 1.948,1.219 true 0.167,0.167 0.479,0.365 0.313,0.198 10 false *a 1.01,0.281 1.323,0.479 0.313,0.198 10 false M73 2.042,0.292 2.354,0.49 0.313,0.198 10 false M61 1.458,0.281 1.771,0.479 0.313,0.198 10 false *A 2.479,0.271 2.792,0.469 0.313,0.198 10 false *B 1.417,1.906 1.573,2.104 0.156,0.198 10 false + 2.219,1.906 2.375,2.104 0.156,0.198 10 false E
*A for LHD
*B for RHD
*a Component without harness connected
(Front Seat Inner Belt Assembly)


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for LHD
Tester Connection Condition Specified Condition
M73-3 (+) - M73-2 (E) Driver side seat belt unfastened Below 1 Ω
Driver side seat belt fastened 10 kΩ or higher

for RHD
Tester Connection Condition Specified Condition
M61-3 (+) - M61-2 (E) Driver side seat belt unfastened Below 1 Ω
Driver side seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the front seat inner belt assembly.



Hide 73230 2.INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

a.

Check the resistance.

i.
B337570C05
1.469,2.719 1.906,2.99 0.438,0.271 0.917,0.333 1.417,0.583 0.5,0.25 1.833,0.333 2.333,0.583 0.5,0.25 1.417,2 1.667,1.333 true 2.167,2 1.833,1.323 true 0.073,0.063 0.385,0.26 0.313,0.198 10 false *a 1.021,0.375 1.333,0.573 0.313,0.198 10 false M53 1.948,0.375 2.26,0.573 0.313,0.198 10 false M51 1.479,0.385 1.792,0.583 0.313,0.198 10 false *A 2.396,0.375 2.708,0.573 0.313,0.198 10 false *B 1.635,2.781 1.948,2.979 0.313,0.198 10 false B 1.333,2.021 1.563,2.219 0.229,0.198 10 false + 2.146,2.031 2.375,2.229 0.229,0.198 10 false E
*A for LHD
*B for RHD
*a Component without harness connected
(Front Seat Inner Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for LHD
Tester Connection Condition Specified Condition
M53-2 (E) - B-3 Front passenger side seat belt unfastened Below 1 Ω
Front passenger side seat belt fastened 10 kΩ or higher
M53-3 (+) - B-1 Always Below 1 Ω

for RHD
Tester Connection Condition Specified Condition
M51-2 (E) - B-3 Front passenger side seat belt unfastened Below 1 Ω
Front passenger side seat belt fastened 10 kΩ or higher
M51-3 (+) - B-1 Always Below 1 Ω


If the result is not as specified, replace the front seat inner belt assembly.