Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR
RM32K0E _59 Vehicle Exterior _061789 WIPER / WASHER _0304158 WASHER MOTOR A

WIPER / WASHER  WASHER MOTOR  INSTALLATION  


PROCEDURE

Hide 85310 1.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.
E357042C01
0,0 0,0 false
V113147

Install in this Direction


Install the washer motor and pump assembly as shown in the illustration.


b.

Connect the connector.


c.

Connect the washer hose.


Hide 2.ADD WASHER FLUID

a.

Connect the rear washer hose.


b.

Add washer fluid to the washer jar.


Hide 53875A 3.INSTALL FRONT FENDER LINER RH

a.

Install the front fender liner RH with the 6 clips and 6 screws.


b.
E356918

Install the pin hold clips as shown in the illustration.

NOTICE:

Insert each pin hold clip with the slot aligned vertically. Do not rotate the pin hold clip after inserting it. After installation, confirm that the slot is aligned vertically.



Hide 4.INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY RH

Hide 75601A 5.INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH

Hide 53851D 6.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

a.

Install the front wheel opening extension pad RH with the 5 screws.


Hide 7.INSTALL FRONT WHEEL RH