Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › RADIATOR GRILLE › 2016.10–2019.09
RM32K0E _59 Vehicle Exterior _061792 EXTERIOR PANELS / TRIM _0304175 RADIATOR GRILLE A

EXTERIOR PANELS / TRIM  RADIATOR GRILLE  DISASSEMBLY  


PROCEDURE

Hide 53395H 1.REMOVE HOOD TO RADIATOR GRILLE SEAL

a.
B473179

Disengage the clips to remove the hood to radiator grille seal.


Hide 53112F 2.REMOVE RADIATOR INSIDE GRILLE

a.
B473180

Remove the 2 screws.


b.

Disengage the claws to remove the radiator inside grille.


c.
B473192

Remove the 6 nuts.


Hide 75311 3.REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM

a.
B473181C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the spring nut.


b.
B473182C02
0.563,0.365 0.865,0.469 false 2.156,0.385 2.458,0.49 false 1.292,2.51 1.5,2.292 true 0.385,0.26 0.698,0.458 0.313,0.198 10 false *a 1.99,0.281 2.302,0.479 0.313,0.198 10 false *a 1.125,2.531 1.396,2.75 0.271,0.219 10 true *b
*a Spring Nut
*b Protective Tape


Using a screwdriver with its tip wrapped in protective tape, pull out the 2 spring nuts as shown in the illustration.


c.
B473183C01
1.042,0.313 1.375,0.313 false 1.917,1.229 2.25,1.229 false 0.844,0.219 1.156,0.417 0.313,0.198 10 false *a 2.313,1.135 2.625,1.333 0.313,0.198 10 false *a
*a Cut


Using a plier nipper (side cutters), cut the 2 spring nuts at the positions shown in the illustration and remove them.


d.
B473184

Disengage the claws and guides to remove the radiator grille (or front panel) emblem.