Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › GRILLE SHUTTER › 2016.10–2019.09
RM32K0E _59 Vehicle Exterior _061792 EXTERIOR PANELS / TRIM _0304176 GRILLE SHUTTER A

EXTERIOR PANELS / TRIM  GRILLE SHUTTER  REASSEMBLY  


PROCEDURE

Hide 53158C 1.INSTALL NO. 4 RADIATOR GRILLE SEAL

HINT:

When installing the No. 4 radiator grille seal, heat the radiator shutter sub-assembly using a heat light.


Heating Temperature
Item Temperature
Radiator Shutter Sub-assembly 20 to 30°C (68 to 86°F)

CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the radiator shutter sub-assembly excessively.


a.

Clean the radiator shutter sub-assembly surface.

i.

Using a heat light, heat the radiator shutter sub-assembly surface.


ii.

Remove the double-sided tape from the radiator shutter sub-assembly.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Using a heat light, heat the radiator shutter sub-assembly.


c.

Remove the release paper from a new No. 4 radiator grille seal.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



d.
B458836C01
1.927,1.354 2.354,1.479 true 1.042,1.792 1.375,1.542 true 0.844,1.781 1.156,1.979 0.313,0.198 10 false *a 2.417,1.448 2.646,1.656 0.229,0.208 10 true *a
*a Line


Install the No. 4 radiator grille seal as shown in the illustration.

HINT:

Install a No. 4 radiator grille seal along the line on the radiator shutter sub-assembly.



Hide 53155G 2.INSTALL RADIATOR GRILLE SEAL

HINT:

When installing the radiator grille seal, heat the radiator shutter sub-assembly using a heat light.


Heating Temperature
Item Temperature
Radiator Shutter Sub-assembly 20 to 30°C (68 to 86°F)

CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the radiator shutter sub-assembly excessively.


a.

Clean the radiator shutter sub-assembly surface.

i.

Using a heat light, heat the radiator shutter sub-assembly surface.


ii.

Remove the double-sided tape from the radiator shutter sub-assembly.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Using a heat light, heat the radiator shutter sub-assembly.


c.

Remove the release paper from a new radiator grille seal.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



d.
B458837C01
2.188,1.823 2.396,1.385 true 0.375,1.26 0.427,0.677 true 2.104,1.854 2.323,2.063 0.219,0.208 10 false *a 0.313,1.292 0.552,1.49 0.24,0.198 10 false *a
*a Line


Install the radiator grille seal as shown in the illustration.

HINT:

Install a radiator grille seal along the line on the radiator shuttersub-assembly.



Hide 53157B 3.INSTALL NO. 3 RADIATOR GRILLE SEAL

HINT:

When installing the No. 3 radiator grille seal, heat the radiator shutter sub-assembly using a heat light.


Heating Temperature
Item Temperature
Radiator Shutter Sub-assembly 20 to 30°C (68 to 86°F)

CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the radiator shutter sub-assembly excessively.


a.

Clean the radiator shutter sub-assembly surface.

i.

Using a heat light, heat the radiator shutter sub-assembly surface.


ii.

Remove the double-sided tape from the radiator shutter sub-assembly.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Using a heat light, heat the radiator shutter sub-assembly.


c.

Remove the release paper from a new No. 3 radiator grille seal.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



d.
B458838C01
1.542,0.323 1.115,0.26 false 2.24,0.938 1.927,0.813 true 0.927,0.177 1.24,0.375 0.313,0.198 10 false *1 2.292,0.938 2.542,1.146 0.25,0.208 10 true *a
*1 Radiator Grille Seal
*a Line


Install the No. 3 radiator grille seal as shown in the illustration.

HINT:

Install a No. 3 radiator grille seal along the line on the radiator shutter sub-assembly.



Hide 88940C 4.INSTALL SWING GRILLE ACTUATOR ASSEMBLY

a.

When installing a new swing grille actuator assembly:

i.

Open the grille shutter fin as shown in the illustration.

B458839



b.
B458840C01
0,0 0,0 false
V113147

Install in this Direction


Install the swing grille actuator assembly as shown in the illustration.


Hide 85667E 5.INSTALL MOTOR COVER

a.
B458841C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws as shown in the illustration to install the motor cover.