Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING
RM32K0E _59 Vehicle Exterior _061792 EXTERIOR PANELS / TRIM _0304180 ROCKER PANEL MOULDING A

EXTERIOR PANELS / TRIM  ROCKER PANEL MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 65632D 1.REMOVE REAR WHEEL HOUSE FRONT PLATE

Hide 75852 2.REMOVE ROCKER PANEL MOULDING

a.

Apply protective tape around the rocker panel moulding and doors as shown in the illustration.

B458688C01
0,0 0,0 false
V100155

Protective Tape - -



b.

Remove the 8 clips.

B458689


c.

Remove the 5 screws.

B458690


d.
B465433C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the screws.


e.

Disengage the claw to disconnect the quarter outside moulding LH as shown in the illustration.


f.

Disengage the clips to remove the rocker panel moulding as shown in the illustration.

B465626C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)