Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR OUTSIDE MOULDING › 2016.10–2020.08
RM32K0E _59 Vehicle Exterior _061792 EXTERIOR PANELS / TRIM _0304183 FRONT DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  FRONT DOOR OUTSIDE MOULDING  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 75392F 1.INSTALL OUTSIDE MOULDING RETAINER

a.

When using a new front door outside moulding:

i.

Clean the surface of the front door outside moulding.



b.

When reusing the front door outside moulding:

i.

Remove the double-sided tape from the front door outside moulding.


ii.

Wipe off any tape adhesive residue with cleaner.



c.

Install a new outside moulding retainer.

i.

Remove the peeling paper from the face of the outside moulding retainer.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



ii.
B458719C01
0.583,0.896 0.417,1.167 0.417,1.167 0.667,0.979 true 2.833,0.917 3,1.167 3,1.167 2.75,1 true 3.052,1.063 3.219,1.229 0.167,0.167 10 true *1 0.75,0.656 0.917,0.823 0.167,0.167 10 true *a 0.24,1.063 0.406,1.229 0.167,0.167 10 true *1 2.51,0.677 2.677,0.844 0.167,0.167 10 true *a
*1 Mark-off Line
*a 4.0 mm (0.157 in.)


Install the outside moulding retainer as shown in the illustration.



Hide 75793 2.INSTALL FRONT DOOR UPPER OUTSIDE MOULDING PAD

a.

When using a new front door outside moulding:

i.

Clean the surface of the front door outside moulding.



b.

When reusing the front door outside moulding:

i.

Remove the double-sided tape from the front door outside moulding.


ii.

Wipe off any tape adhesive residue with cleaner.



c.

Install a new front door upper outside moulding pad.

i.

Remove the peeling paper from the face of the front door upper outside moulding pad.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



ii.
B458720C01
2.719,0.573 2.417,0.833 2.417,0.833 2.927,0.698 true 0.969,0.458 1.167,0.583 1.167,0.583 0.885,0.542 true 2.229,0.729 2.396,0.896 0.167,0.167 10 true *1 1.063,0.208 1.375,0.365 0.313,0.156 10 false *a 2.833,0.365 3.146,0.521 0.313,0.156 10 false *b 1.25,0.479 1.417,0.646 0.167,0.167 10 false *1
*1 Mark-off Line
*a 3.0 mm (0.118 in.)
*b 23.0 mm (0.906 in.)


Install the front door upper outside moulding pad as shown in the illustration.