Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR DOOR OUTSIDE MOULDING
RM32K0E _59 Vehicle Exterior _061792 EXTERIOR PANELS / TRIM _0304185 REAR DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  REAR DOOR OUTSIDE MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 75742 1.INSTALL REAR DOOR OUTSIDE MOULDING

a.

Remove the peeling paper from the face of the outside moulding retainer.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



b.
B458847C02
0,0 0,0 false
V113147

Install in this Direction


Engage the clips as to install rear door outside moulding as shown in the illustration.


c.

Remove the protective tape.


d.

Install the gasket and nut.


e.

Install the hole cover.