Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF DRIP SIDE FINISH MOULDING
RM32K0E _59 Vehicle Exterior _061792 EXTERIOR PANELS / TRIM _0304186 ROOF DRIP SIDE FINISH MOULDING A

EXTERIOR PANELS / TRIM  ROOF DRIP SIDE FINISH MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75556C 1.REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING

a.
B458743C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the center roof drip side finish moulding.


b.
B458744

Using a moulding remover D, disengage the 2 clips to remove the center roof drip side finish moulding.

NOTICE:
·

Do not remove the roof drip side finish moulding clips.

·

If a roof drip side finish moulding clip is damaged or falls off, replace it with a new one.