76812A
1.REMOVE NO. 2 BACK DOOR OUTSIDE GARNISH
|
Remove in this Direction |
Remove the 7 No. 1 outside moulding retainers and No. 2 back door outside garnish as shown in the illustration.
76822B
2.REMOVE BACK DOOR GARNISH SIDE PROTECTOR LH
Remove the back door garnish side protector LH.
76821B
3.REMOVE BACK DOOR GARNISH SIDE PROTECTOR RH
Use the same procedure as for the LH side.
76825
4.REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR
Remove the back door outside garnish protector.
76821
5.REMOVE BACK DOOR GARNISH MOULDING UPPER PROTECTOR
Remove the back door garnish moulding upper protector.
76824
6.REMOVE BACK DOOR GARNISH MOULDING PROTECTOR LH
for Back Door Outside Garnish Side:
Remove the back door garnish moulding protector LH.
for No. 2 Back Door Outside Garnish Side:
Remove the back door garnish moulding protector LH.
76825D
7.REMOVE NO. 1 BACK DOOR OUTSIDE GARNISH PROTECTOR
Using the same procedure, remove every No. 1 back door outside garnish protector.
Remove the No. 1 back door outside garnish protector.
76818
8.REMOVE BACK DOOR OUTSIDE GARNISH PAD
Using the same procedure, remove every back door outside garnish pad.
Remove the back door outside garnish pad.
9.REMOVE NO. 2 BACK DOOR OUTSIDE GARNISH PROTECTOR
Using the same procedure, remove every No. 2 back door outside garnish protector.
Remove the No. 2 back door outside garnish protector.
76822
10.REMOVE BACK DOOR GARNISH MOULDING LOWER PROTECTOR
Using the same procedure, remove every back door garnish moulding lower protector.
Remove the back door garnish moulding lower protector.
76819
11.REMOVE BACK DOOR OUTSIDE GARNISH SEAL
Using the same procedure, remove every back door outside garnish seal.
Remove the back door outside garnish seal.
75441E
12.REMOVE NO. 1 BACK DOOR NAME PLATE
75442A
13.REMOVE NO. 2 BACK DOOR NAME PLATE
75443
14.REMOVE NO. 3 BACK DOOR NAME PLATE
75431A
15.REMOVE NO. 1 BACK DOOR EMBLEM