Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY (for LED Type) › 2016.10–2019.09
RM32K0E _59 Vehicle Exterior _061162 LIGHTING (EXT) _0304270 REAR LIGHT ASSEMBLY(for LED Type) G

LIGHTING (EXT)  REAR LIGHT ASSEMBLY(for LED Type)  INSPECTION  


PROCEDURE

Hide 81590A 1.INSPECT REAR LIGHT ASSEMBLY LH

a.
E358083C01
1.542,1.198 1.073,1.021 true 2.396,1.052 1.896,1.188 true 2.385,1.667 1.885,1.51 true 0.125,0.083 0.438,0.24 0.313,0.156 10 false *a 0.917,0.896 1.229,1.052 0.313,0.156 10 false E 2.438,0.948 2.75,1.104 0.313,0.156 10 false B 2.448,1.563 2.76,1.719 0.313,0.156 10 false B
*a Component without harness connected
(Rear Light Assembly LH)


Apply auxiliary battery voltage to the rear light assembly LH and check that the light comes on.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 3 (B)
Auxiliary battery negative (-) → Terminal 2 (E)
Taillight comes on


If the result is not as specified, replace the rear combination light assembly LH.


b.

Apply auxiliary battery voltage to the rear light assembly LH and check that the light comes on.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1 (B)
Auxiliary battery negative (-) → Terminal 2 (E)
Back-up light comes on


If the result is not as specified, replace the rear combination light assembly LH.


Hide 81580D 2.INSPECT REAR LIGHT ASSEMBLY RH

a.
E358083C01
1.542,1.198 1.073,1.021 true 2.396,1.052 1.896,1.188 true 2.385,1.667 1.885,1.51 true 0.125,0.083 0.438,0.24 0.313,0.156 10 false *a 0.917,0.896 1.229,1.052 0.313,0.156 10 false E 2.438,0.948 2.75,1.104 0.313,0.156 10 false B 2.448,1.563 2.76,1.719 0.313,0.156 10 false B
*a Component without harness connected
(Rear Light Assembly RH)


Apply auxiliary battery voltage to the rear light assembly RH and check that the light comes on.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 3 (B)
Auxiliary battery negative (-) → Terminal 2 (E)
Taillight comes on


If the result is not as specified, replace the rear combination light assembly RH.


b.

Apply auxiliary battery voltage to the rear light assembly RH and check that the light comes on.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1 (B)
Auxiliary battery negative (-) → Terminal 2 (E)
Back-up light comes on


If the result is not as specified, replace the rear combination light assembly RH.