Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY
RM32K0E _59 Vehicle Exterior _061162 LIGHTING (EXT) _0304275 LICENSE PLATE LIGHT ASSEMBLY G

LIGHTING (EXT)  LICENSE PLATE LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81270 1.INSPECT LICENSE PLATE LIGHT ASSEMBLY

a.
E125017C56
1.01,1.813 1.427,1.396 true 2.344,1.76 2,1.396 true 0.24,0.094 0.49,0.302 0.25,0.208 10 false *a 2.385,1.729 2.583,1.979 0.198,0.25 10 false E 0.875,1.75 1.073,2 0.198,0.25 10 false B
*a Component without harness connected
(License Plate Light Assembly)


Apply auxiliary battery voltage to the license plate light assembly and check that the light comes on.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 2 (B)
Auxiliary battery negative (-) → Terminal 1 (E)
License plate light comes on


If the result is not as specified, replace the license plate light assembly.