Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT BULB
RM32K0E _59 Vehicle Exterior _061162 LIGHTING (EXT) _0304276 LICENSE PLATE LIGHT BULB A

LIGHTING (EXT)  LICENSE PLATE LIGHT BULB  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL LICENSE PLATE LIGHT BULB

a.
E358065C01
0,0 0,0 false
V113147

Install in this Direction


Install the license plate light bulb to the license plate light socket and wire as shown in the illustration.


b.
E358066C01
0,0 0,0 false
V113147

Install in this Direction


Turn the back license plate light socket and wire with the license plate light bulb as shown in the illustration to connect them as a unit.


Hide 2.INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER

a.
E358086C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the No. 2 back door service hole cover as shown in the illustration.