Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT LEVELING SWITCH
RM32K0E _59 Vehicle Exterior _061162 LIGHTING (EXT) _0304280 HEADLIGHT LEVELING SWITCH G

LIGHTING (EXT)  HEADLIGHT LEVELING SWITCH  INSPECTION  


PROCEDURE

Hide 84152 1.INSPECT HEADLIGHT LEVELING SWITCH

a.

Voltage Check.

i.
E184428C01
1.917,1.802 1.844,1.406 true 2.688,1.292 2.177,1.344 true 1.26,1.323 0.719,1.25 true 0.104,0.083 0.417,0.24 0.313,0.156 10 false *a 2.729,1.219 2.885,1.417 0.156,0.198 10 false B 1.906,1.823 2.063,2.021 0.156,0.198 10 false T 0.625,1.177 0.781,1.375 0.156,0.198 10 false E
*a Component without harness connected
(Headlight Leveling Switch)


Connect a positive (+) lead from the auxiliary battery to terminal 1 (B) and a negative (-) lead to terminal 4 (E).


ii.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
2 (T) - 4 (E) 0 9.5 to 10.2 V
1 8.1 to 8.8 V
2 6.6 to 7.4 V
3 5.2 to 6.0 V
4 3.8 to 4.5 V
5 2.4 to 3.1 V


HINT:
·

Auxiliary battery voltage is 12 V.

·

If the result is not as specified, replace the headlight leveling switch.





b.

Illumination Inspection.

i.
E184428C02
1.448,1.865 1.583,1.406 true 0.635,1.24 1.271,1.333 true 0.094,0.063 0.406,0.219 0.313,0.156 10 false *a 0.531,1.167 0.688,1.365 0.156,0.198 10 false E 1.344,1.885 1.677,2.104 0.333,0.219 10 false ILL+
*a Component without harness connected
(Headlight Leveling Switch)


Apply auxiliary battery voltage to the headlight leveling switch and check that the switch illuminates.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 3 (ILL+)
Auxiliary battery negative (-) → Terminal 4 (E)
Illuminates


HINT:

If the result is not as specified, replace the headlight leveling switch.