Home › Vehicle Exterior › LIGHTING (EXT) › RELAY
RM32K0E _59 Vehicle Exterior _061162 LIGHTING (EXT) _0304286 RELAY G

LIGHTING (EXT)  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85916D 1.INSPECT FOG FR RELAY

a.
E273663N04
1.99,0.802 2.302,0.802 true 2.896,0.802 3.177,0.802 true 2.792,1.125 3.177,1.125 true 2.792,1.573 3.177,1.573 true 1.885,0.719 2.052,0.885 0.167,0.167 10 false 1 3.219,0.719 3.385,0.885 0.167,0.167 10 false 2 3.208,1.042 3.375,1.208 0.167,0.167 10 false 5 3.208,1.49 3.375,1.656 0.167,0.167 10 false 3

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the fog fr relay.



Hide 85916P 2.INSPECT HEADLIGHT DIMMER RELAY

a.
E273663N04
1.99,0.802 2.302,0.802 true 2.896,0.802 3.177,0.802 true 2.792,1.125 3.177,1.125 true 2.792,1.573 3.177,1.573 true 1.885,0.719 2.052,0.885 0.167,0.167 10 false 1 3.219,0.719 3.385,0.885 0.167,0.167 10 false 2 3.208,1.042 3.375,1.208 0.167,0.167 10 false 5 3.208,1.49 3.375,1.656 0.167,0.167 10 false 3

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the headlight dimmer relay.