84040
1.INSPECT MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY
Check that the LED illuminates.
| *a | Component without harness connected
(Multiplex Network Master Switch Assembly) |
| *b | LED Illumination |
Auxiliary battery voltage to the multiplex network master switch assembly and check that the LED illuminates.
| Auxiliary Battery Connection | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → 3 (ILL+)
Auxiliary battery negative (-) → 13 (ILL-) |
LED illuminates |
If the result is not as specified, replace the multiplex network master switch assembly.