Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR WEATHERSTRIP › 2016.10–2019.09
RM32K0E _59 Vehicle Exterior _061791 DOOR / HATCH _0304559 BACK DOOR WEATHERSTRIP A

DOOR / HATCH  BACK DOOR WEATHERSTRIP  INSTALLATION  


PROCEDURE

Hide 67881A 1.INSTALL BACK DOOR WEATHERSTRIP

a.
B450741C01
1.01,3.115 0.635,2.938 true 1.698,0.833 1.698,0.563 true 0.625,1.625 0.375,1.073 0.375,1.073 0.552,0.51 true 2.823,1.604 3.021,1.031 3.021,1.031 2.875,0.5 true 1.063,3.052 1.375,3.208 0.313,0.156 10 false *a 0.188,0.979 0.5,1.135 0.313,0.156 10 false *b 3.052,0.969 3.292,1.198 0.24,0.229 10 false *b 1.625,0.844 1.938,1 0.313,0.156 10 false *b
*a Paint Mark
*b Mark Position


Remove any non-drying sealer on the body with non-residue solvent.


b.

Align the paint marks with the positions on the body flange and install a new back door weatherstrip.

Paint Mark:
Location Color
Center Green
Side Blue


NOTICE:
·

Always align the paint mark when installing the part. If the paint mark position is out of place, coolant leaks may occur.

·

After the installation, check that the corners are properly installed.



HINT:

To easily install the weatherstrip, first install the area with the paint mark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.