Home › Vehicle Exterior › MIRROR (EXT) › RELAY
RM32K0E _59 Vehicle Exterior _061963 MIRROR (EXT) _0304568 RELAY G

MIRROR (EXT)  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 87989 1.INSPECT MIRROR CONTROL RELAY

a.

Check the resistance.

i.
B319588

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Auxiliary battery voltage applied to terminals 1 and 2 10 kΩ or higher
3 - 4 Auxiliary battery voltage not applied between terminals Below 1 Ω
3 - 5 Auxiliary battery voltage applied to terminals 1 and 2 Below 1 Ω
3 - 5 Auxiliary battery voltage not applied between terminals 10 kΩ or higher
4 - 5 Always 10 kΩ or higher


If the result is not as specified, replace the mirror control relay.