Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM (w/ Steering Control) › 2016.10–2020.08
RM32K0E _51 Engine / Hybrid System _061336 CRUISE CONTROL _0304573 LANE DEPARTURE ALERT SYSTEM(w/ Steering Control) U

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM(w/ Steering Control)  FAIL-SAFE CHART  


FAIL-SAFE FUNCTION


a.

When a malfunction occurs in the lane departure alert system (w/ steering control), a message will be displayed on the multi-information display in the combination meter assembly and the lane departure alert system (w/ steering control) will be disabled depending on the malfunction.

Warning Message Cause Fail-safe Operation Conditions to Return to Normal Condition
Lane Departure Alert Function Lane Departure Control Function Vehicle Sway Warning
Lane Departure Alert Malfunction Visit Your Dealer Lane departure alert system (w/ Steering Control) is malfunctioning X X X After system returns to normal, power switch is turned off and then on (IG)
Front Camera Unavailable
·

Abnormal forward recognition camera voltage

·

Forward recognition camera temperature outside of operational range

·

Other forward recognition camera malfunction


X X X
·

Forward recognition camera temperature returns to normal

·

Forward recognition camera voltage returns to normal

·

Forward recognition camera returns to normal


Front Camera Vision Blocked Clean and Demist Windshield Forward recognition camera view is unclear X X X Forward recognition camera or area of windshield glass in front of forward recognition camera is cleaned
LDA Unavailable Sensor other than forward recognition camera sensor is temporarily unavailable X X X Temporarily unavailable sensor becomes available

X: Control is suspended