Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2016.10–2018.05
RM32K0E _58 Vehicle Interior _062180 METER / GAUGE / DISPLAY _0304590 METER / GAUGE SYSTEM C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  U0100  Lost Communication with ECM / PCM "A"  U0129  Lost Communication with Brake System Control Module  U0131  Lost Communication with Power Steering Control Module  U0142  Lost Communication with Body Control Module "B"  U0151  Lost Communication with Restraints Control Module  U0163  Lost Communication with Navigation Control Module  U0182  Lost Communication with Lighting Control Module Front  U023A  Lost Communication with Front Camera Module  U1104  Lost Communication with Driving Support ECU  


DESCRIPTION

The combination meter assembly communicates with the ECM, brake actuator assembly (skid control ECU), power steering ECU assembly, main body ECU (multiplex network body ECU), airbag sensor assembly, radio and display receiver assembly*1, headlight control ECU sub-assembly LH*2, forward recognition camera*3 and millimeter wave radar sensor assembly*3 via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
U0100 Lost Communication with ECM / PCM "A" When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with ECM or hybrid vehicle control ECU continues for 2 seconds or more


·

ECM

·

CAN communication system

·

Combination meter assembly

·

Hybrid vehicle control ECU


DTC stored -
U0129 Lost Communication with Brake System Control Module When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with brake actuator assembly (skid control ECU) continues for 3 seconds or more


·

Brake actuator assembly (skid control ECU)

·

CAN communication system

·

Combination meter assembly


DTC stored -
U0131 Lost Communication with Power Steering Control Module When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with power steering ECU assembly continues for 3 seconds or more


·

Power steering ECU assembly

·

CAN communication system

·

Combination meter assembly


DTC stored -
U0142 Lost Communication with Body Control Module "B" When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with main body ECU (multiplex network body ECU) continues for 3 seconds or more


·

Main body ECU (multiplex network body ECU)

·

CAN communication system

·

Combination meter assembly


DTC stored -
U0151 Lost Communication with Restraints Control Module When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with airbag sensor assembly continues for 10 seconds or more


·

Airbag sensor assembly

·

CAN communication system

·

Combination meter assembly


DTC stored -
U0163 Lost Communication with Navigation Control Module When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with radio and display receiver assembly continues for 3 seconds or more


·

Radio and display receiver assembly

·

CAN communication system

·

Combination meter assembly


DTC stored *1
U0182 Lost Communication with Lighting Control Module Front When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with headlight control ECU sub-assembly LH continues for 10 seconds or more


·

Headlight control ECU sub-assembly LH

·

CAN communication system

·

Combination meter assembly


DTC stored *2
U023A Lost Communication with Front Camera Module When IG voltage is 9.5 V or more and either of the following conditions is met:
·

No communication with lane departure warning camera continues for 10 seconds or more

·

No communication with millimeter wave radar sensor assembly continues for 10 seconds or more


·

Forward recognition camera

·

Millimeter wave radar sensor assembly

·

CAN communication system

·

Combination meter assembly


DTC stored *3, *4
U1104 Lost Communication with Driving Support ECU When IG voltage is 9.5 V or more and the following condition is detected:
·

No communication with millimeter wave radar sensor assembly continues for 10 seconds or more


·

Millimeter wave radar sensor assembly

·

CAN communication system

·

Combination meter assembly


DTC stored *1

*1: for Radio & Display Receiver Type

*2: for LED Headlight

*3: w/ Toyota Safety Sense

*4: When U0234 and U1104 are output simultaneously, there may be a malfunction in the millimeter wave radrar sensor assembly.


PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM

Result:
Result Proceed to
CAN communication DTCs are output. A
CAN communication DTCs are not output. B



A

B