Home › Suspension › TIRE / WHEEL › WHEEL CAP › 2016.10–2019.09
RM32K0E _53 Suspension _061172 TIRE / WHEEL _0305125 WHEEL CAP A

TIRE / WHEEL  WHEEL CAP  REPLACEMENT  


PROCEDURE

Hide 42621 1.REPLACE WHEEL CAP

a.
C367267C01
0,0 0,0 false
V100155

Fastening Tape
V113146

Place Hands Here
V113147

Remove in this Direction


Disengage the claws, fastening tapes and pins to remove the wheel cap as shown in the illustration.

NOTICE:

When removing the wheel cap, disengage each location where your hands are placed one by one, and do not attempt to disengage everything at once.



b.
C367271C01
0,0 0,0 false
V100155

Fastening Tape


Remove the 5 fastening tapes from the disc wheel.


c.

Wipe off any tape adhesive residue from the disc wheel with a neutral detergent.


d.

Using a heat light, heat the disc wheel and a new wheel cap.

Heating Temperature
Item Temperature
Disc Wheel 20 to 40°C (68 to 104°F)
Wheel Cap 20 to 40°C (68 to 104°F)

CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the disc wheel or wheel cap excessively.



e.
C369997

Remove the release paper from the 5 fastening tapes of the wheel cap.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



f.
C367268C01
0,0 0,0 false
V100155

Fastening Tape
V113146

Place Hands Here
V113147

Install in this Direction


Align the cutout of the valve and the locating pins, and install the wheel cap as shown in the illustration.


g.

Press firmly until the claws and fastening tapes engage.


h.

Check that the wheel cap is not excessively loose.