Home › General › MAINTENANCE › FRONT WIPER RUBBER
RM32K0E _V1 General _059911 MAINTENANCE _0305340 FRONT WIPER RUBBER A

MAINTENANCE  FRONT WIPER RUBBER  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

Make sure to hold the front wiper arm while lifting it as lifting the front wiper arm by the front wiper blade may damage or deform the front wiper blade.


HINT:
·

Use the same procedure for the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 1.INSTALL FRONT WIPER RUBBER

HINT:

The wiper rubber can be installed from either end of the front wiper blade.


a.
E352334C01
1.865,0.865 2.677,0.49 true 2.698,0.385 3.01,0.542 0.313,0.156 10 false *a
*a Slit
V113147

Install in this Direction


Insert the wiper rubber through the slit in the front wiper blade as shown in the illustration.


b.

Pull the wiper rubber as indicated by the arrows, in the order shown in the illustration, until its end is aligned with the slits in the front wiper blade.

E352335C01
5.271,0.896 5.906,0.542 true 5.927,0.417 6.24,0.573 0.313,0.156 10 false *a 2.385,1.698 2.542,1.896 0.156,0.198 10 false 3 2.177,2.542 2.333,2.74 0.156,0.198 10 false 2 1.844,4.354 2,4.552 0.156,0.198 10 false 1 2.646,0.927 2.802,1.125 0.156,0.198 10 false 4
*a Slit - -



c.
E352336C01
2.75,1.917 2.75,1.167 false 2.698,1.927 3.01,2.083 0.313,0.156 10 false *a
*a End of Shield Cap


Slide the wiper rubber in the direction indicated by the arrow shown in the illustration to install it.

NOTICE:

Make sure that each end of the wiper rubber is fully inserted into each shield cap.



Hide 85222A 2.INSTALL FRONT WIPER BLADE

a.

Insert the protrusion of the front wiper arm into the groove of the front wiper blade in the direction indicated by the arrow (1) shown in the illustration.

E352337C01
1.313,0.906 1.844,0.49 true 1.313,1.844 1.854,1.656 true 5.823,1.844 5.979,1.24 true 1.865,0.354 2.177,0.51 0.313,0.156 10 false *a 1.865,1.542 2.177,1.698 0.313,0.156 10 false *b 5.75,1.844 6.063,2 0.313,0.156 10 false *c
*a Protrusion of Front Wiper Arm *b Groove of Front Wiper Blade
*c Lock Button - -
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)



b.

Slide the front wiper blade in the direction indicated by the arrow (2) shown in the illustration until the lock button locks to install the front wiper blade.

NOTICE:

Make sure that the lock button locks so that it is installed securely.