Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
87961
1.REMOVE OUTER MIRROR
87945
2.REMOVE OUTER MIRROR COVER
81730B
3.REMOVE SIDE TURN SIGNAL LIGHT BULB
81890D
4.REMOVE OUTER MIRROR LIGHT ASSEMBLY (w/ Illumination)
8794A
5.REMOVE NO. 2 OUTER MIRROR COVER (w/ Illumination)
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the No. 2 outer mirror cover as shown in the illustration.