Home › Vehicle Interior › SEAT › FRONT SEATBACK HEATER › 2018.05–2019.09
RM32K0E _58 Vehicle Interior _061825 SEAT _0301292 FRONT SEATBACK HEATER G

SEAT  FRONT SEATBACK HEATER  INSPECTION  


PROCEDURE

Hide 87510N 1.INSPECT FRONT SEATBACK HEATER ASSEMBLY LH

a.

Check the resistance.

i.
B460293C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *a
*a Component without harness connected
(Front Seatback Heater Assembly LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Seat heater temperature 20°C (68°F) 2.59 to 3.15 Ω


If the result is not as specified, replace the front seatback heater assembly LH.



Hide 87510M 2.INSPECT FRONT SEATBACK HEATER ASSEMBLY RH

a.

Check the resistance.

i.
B460293C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *a
*a Component without harness connected
(Front Seatback Heater Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Seat heater temperature 20°C (68°F) 2.59 to 3.15 Ω


If the result is not as specified, replace the front seatback heater assembly RH.