87510L
1.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH
Check the resistance.
| *a | Component without harness connected
(Front Seat Cushion Heater Assembly LH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A-4 - A-5 | Seat heater temperature 25°C (77°F) | 4.93 to 5.07 kΩ |
| B-1 - B-2 | Seat heater temperature 20°C (68°F) | 2.99 to 3.59 Ω |
| A-2 - A-6 - B-2 | Always | Below 1 Ω |
If the result is not as specified, replace the front seat cushion heater assembly LH.
87510K
2.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH
Check the resistance.
| *a | Component without harness connected
(Front Seat Cushion Heater Assembly RH) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A-4 - A-5 | Seat heater temperature 25°C (77°F) | 4.93 to 5.07 kΩ |
| B-1 - B-2 | Seat heater temperature 20°C (68°F) | 2.99 to 3.59 Ω |
| A-2 - A-6 - B-2 | Always | Below 1 Ω |
If the result is not as specified, replace the front seat cushion heater assembly RH.