CHECK DTC AND FREEZE FRAME DATA (USING GTS)
Turn the power switch off.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Chassis / Electric Parking Brake / Trouble Codes.
Check for DTCs.
Check the freeze frame data.
If DTCs are output, check the freeze frame data and read the vehicle status when the DTC was stored.
for Freeze Frame Data: Click hereBrake>PARKING BRAKE>ELECTRIC PARKING BRAKE SYSTEM>FREEZE FRAME DATA
CLEAR DTC AND FREEZE FRAME DATA (USING GTS)
Turn the power switch off.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Chassis / Electric Parking Brake / Trouble Codes.
Clear the DTCs.
When DTCs are cleared, the freeze frame data will also be cleared.