Home › Vehicle Exterior › DOOR / HATCH › FRONT DOOR OPENING TRIM WEATHERSTRIP › from 2019.09
RM32K0E _59 Vehicle Exterior _061791 DOOR / HATCH _0304555 FRONT DOOR OPENING TRIM WEATHERSTRIP A

DOOR / HATCH  FRONT DOOR OPENING TRIM WEATHERSTRIP  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 62312B 1.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

a.
B450735C01
1.01,0.51 1.146,0.281 false 2.344,0.76 2.552,0.219 true 1.156,0.135 1.469,0.333 0.313,0.198 10 false *a 2.573,0.073 2.885,0.271 0.313,0.198 10 false *b
*a Paint Mark
*b Mark Position


Align the paint mark on the front door opening trim weatherstrip with the mark position on the vehicle and install the front door opening trim weatherstrip as shown in the illustration.

Paint Mark:
Location Color
LH Side (for TMMT Made) Yellow
LH Side (for TMC Made) Yellow Green
RH Side (for TMMT Made) Dark Green
RH Side (for TMC Made) Light Blue


NOTICE:
·

Always align the alignment mark with the flange when installing the part. If the alignment mark is not aligned, water ingress may occur.

·

After installation, check that the corners fit correctly.



HINT:

To easily install the weatherstrip, first install the area with the paint mark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.



Hide 62112 2.INSTALL COWL SIDE TRIM BOARD

Hide 67914 3.INSTALL FRONT DOOR SCUFF PLATE