Home › Engine / Hybrid System › 2ZR-FXE (HYBRID / BATTERY CONTROL) › BATTERY COOLING FILTER › from 2019.09
RM32K0E _51 Engine / Hybrid System _083958 2ZR-FXE HYBRID / BATTERY CONTROL _0404390 BATTERY COOLING FILTER A

2ZR-FXE HYBRID / BATTERY CONTROL  BATTERY COOLING FILTER  INSTALLATION  


PROCEDURE

Hide G92DH 1.INSTALL NO. 1 HV BATTERY INTAKE FILTER

a.

Engage the 2 claws to temporarily install the No. 1 HV battery intake filter to the battery service hole cover.


b.

Engage the claw to install the No. 1 HV battery intake filter to the battery service hole cover.


Hide 58441E 2.INSTALL BATTERY SERVICE HOLE COVER

a.

Engage the 5 claws to install the battery service hole cover.


b.

Install the clip.


Hide 3. CLEAR DTC

HINT:

If the message "Maintenance required for Traction battery cooling parts. See owner's manual." is displayed on the multi-information display, clean or replace the No. 1 HV battery intake filter, and clear the DTCs to reset the learning values even if no DTCs are output.

for NICKEL METAL HYDRIDE BATTERY:

Click hereEngine / Hybrid System>2ZR-FXE (HYBRID / BATTERY CONTROL)>HYBRID CONTROL SYSTEM (for NICKEL METAL HYDRIDE BATTERY)>DTC CHECK / CLEAR

for LITHIUM-ION BATTERY:

Click hereEngine / Hybrid System>2ZR-FXE (HYBRID / BATTERY CONTROL)>HYBRID CONTROL SYSTEM (for LITHIUM-ION BATTERY)>DTC CHECK / CLEAR