Home › General › SPECIFICATIONS › 2ZR-FXE EMISSION CONTROL › 2018.05–2020.08
RM32K0E _V1 General _059401 SPECIFICATIONS _0303348 2ZR-FXE EMISSION CONTROL F

SPECIFICATIONS  2ZR-FXE EMISSION CONTROL  TORQUE SPECIFICATIONS  


EGR VALVE
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Stud bolt x Camshaft housing sub-assembly 9.5 97 84
EGR valve assembly x EGR pipe with cooler sub-assembly 21 214 15
Inverter with converter assembly x No. 1 inverter bracket 25 255 18
Inverter with converter assembly x No. 2 inverter bracket 25 255 18

EGR COOLER
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
EGR pipe with cooler sub-assembly x Stud bolt 5.0 51 44
EGR valve assembly x EGR pipe with cooler sub-assembly 21 214 15
Stud bolt x Camshaft housing sub-assembly 9.5 97 84
Stud bolt x Cylinder head sub-assembly 9.5 97 84
EGR pipe with cooler sub-assembly x Exhaust manifold (TWC: Front Catalyst) 26 265 19
EGR pipe with cooler sub-assembly x Cylinder head sub-assembly and Camshaft housing sub-assembly 21 214 15
EGR valve assembly x Camshaft housing sub-assembly 21 214 15

VACUUM SENSOR
Part Tightened N*m kgf*cm in.*lbf
E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) x Intake manifold 7.0 71 62

PURGE VALVE
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
No. 3 water by-pass pipe x Camshaft housing sub-assembly 28 286 21
Purge valve (purge VSV) x No. 3 water by-pass pipe 3.4 35 30

PCV VALVE
Part Tightened N*m kgf*cm ft.*lbf
PCV Valve (ventilation valve sub-assembly) x No. 1 ventilation case without a 22 mm ball joint lock nut wrench 20 204 15
with a 22 mm ball joint lock nut wrench 10 102 7