Home › Engine / Hybrid System › M20A-FXS (HYBRID / BATTERY CONTROL) › BATTERY COOLING FILTER › from 2019.09
RM32K0E _51 Engine / Hybrid System _083959 M20A-FXS HYBRID / BATTERY CONTROL _0404429 BATTERY COOLING FILTER A

M20A-FXS HYBRID / BATTERY CONTROL  BATTERY COOLING FILTER  REMOVAL  


PROCEDURE

Hide 58441E 1.REMOVE BATTERY SERVICE HOLE COVER

a.
A431089

Remove the clip.


b.

Disengage the 5 claws and remove the battery service hole cover.


Hide G92DH 2.REMOVE NO. 1 HV BATTERY INTAKE FILTER

HINT:

If the message "Maintenance Required for Hybrid Battery Cooling Parts at Your Dealer" is displayed on the multi-information display in the combination meter assembly, inspect the No. 1 HV battery intake filter.

Click hereEngine / Hybrid System>M20A-FXS (HYBRID / BATTERY CONTROL)>BATTERY COOLING FILTER>INSPECTION


a.
A371659

Disengage the claw.


b.
A371660

Disengage the 2 claws to remove the No. 1 HV battery intake filter from the battery service hole cover.