Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the driver side and front passenger side.
The procedure listed below is for the driver side.
73240
1.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)
Install the front seat belt anchor plate.
for Manual Seat:
| *a | Protruding Part |
Install the front seat inner belt assembly with the nut.
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster assembly.
Engage the clamps.
Engage the claw and clamp.
for Power Seat:
| *a | Protruding Part |
Install the front seat inner belt assembly with the nut.
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster assembly.
Engage the clamp.
Engage the claw and clamps.
73230
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)
Install the front seat belt anchor plate.
| *a | Protruding Part |
Install the front seat inner belt assembly with the nut.
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster assembly.
Engage the clamp.
Engage the claw and clamps.
Connect the connector.
3.INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
4.INSTALL FRONT SEAT ASSEMBLY (for Power Seat)