Home › Engine / Hybrid System › M20A-FXS (FUEL) › FUEL SENDER GAUGE ASSEMBLY › from 2019.09
RM32K0E _51 Engine / Hybrid System _083996 M20A-FXS FUEL _0404506 FUEL SENDER GAUGE ASSEMBLY A

M20A-FXS FUEL  FUEL SENDER GAUGE ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY

a.

Engage the claw to install the fuel sender gauge assembly to the fuel suction tube with pump and gauge assembly.

NOTICE:

Be careful not to bend the arm of the fuel sender gauge assembly.



b.

Engage the 3 clamps to connect the wire harness.

NOTICE:
·

Do not damage the wire harness.

·

When disengaging each wire harness from the clamp, disengage one wire at a time.




c.

Connect the fuel sender gauge assembly connector.


Hide 77020A 2.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY