Home › General › SPECIFICATIONS › M20A-FXS FUEL › from 2019.09
RM32K0E _V1 General _059401 SPECIFICATIONS _0404513 M20A-FXS FUEL F

SPECIFICATIONS  M20A-FXS FUEL  SERVICE DATA  


Fuel pressure Standard Fuel Pressure 196 to 833 kPa (2.0 to 8.5 kgf/cm2, 28 to 121 psi)
Standard fuel pressure (for high pressure) 2400 to 19500 kPag
Fuel pressure : for 5 minutes after engine has stopped Standard Fuel Pressure 98 kPa (1.0 kgf/cm2, 14.2 psi) or more
Fuel injector assembly Standard Resistance 11.6 to 12.4 Ω at 20°C (68°F)
Standard Injection Volume 62 to 74 cc (3.8 to 4.5 cu.in.) per 15 seconds
Difference between Each Fuel Injector Assembly 12 cc (0.7 cu.in.) or less
Standard Fuel Drop 1 drop or less per 19 minutes
Direct fuel injector assembly Standard resistance 1.34 to 1.64 Ω at 20°C (68°F)
Fuel pressure sensor Standard voltage 2 (PFL) - 3 (E2) Approximately 0.56 to 0.94 V
Fuel pressure sensor (for High Pressure) Standard voltage 3 (PR) - 2 (E2) Approximately 0.4 to 0.6 V
Fuel pump Standard Resistance 0.2 to 3.0 Ω at 20°C (68°F)
Fuel pump assembly Standard resistance 0.45 to 0.55 Ω at 20°C (68°F)
Fuel sender gauge assembly Standard Resistance 4.255 to 4.605 V (Float level F)
0.345 to 4.605 V (Float level F to E)
0.345 to 0.695 V (Float level E)