Home › Engine / Hybrid System › M20A-FXS (EMISSION CONTROL) › PURGE VALVE › from 2019.09
RM32K0E _51 Engine / Hybrid System _083997 M20A-FXS EMISSION CONTROL _0404520 PURGE VALVE A

M20A-FXS EMISSION CONTROL  PURGE VALVE  REMOVAL  


PROCEDURE

Hide 25860 1.REMOVE PURGE VALVE (PURGE VSV)

a.
A436753C01
1.708,0.75 1.979,0.75 true 1.958,1.5 2.229,1.5 true 1.094,1 1.365,1 true 1.99,0.656 2.198,0.833 0.208,0.177 10 true *1 2.229,1.417 2.438,1.594 0.208,0.177 10 true *2 0.854,0.927 1.083,1.094 0.229,0.167 10 true *3
*1 No. 1 Fuel Vapor Feed Hose
*2 No. 2 Fuel Vapor Feed Hose
*3 Purge Valve (Purge VSV)


Disconnect the purge valve (purge VSV) connector.


b.

Disconnect the No. 1 fuel vapor feed hose from the purge valve (purge VSV).


c.

Disconnect the No. 2 fuel vapor feed hose from the purge valve (purge VSV).


d.

Remove the bolt.


e.

Disengage the guide and remove the purge valve (purge VSV) from the engine mounting insulator sub-assembly RH.