Home › Engine / Hybrid System › M20A-FXS (EMISSION CONTROL) › DIFFERENTIAL PRESSURE SENSOR › from 2019.09
RM32K0E _51 Engine / Hybrid System _083997 M20A-FXS EMISSION CONTROL _0404522 DIFFERENTIAL PRESSURE SENSOR A

M20A-FXS EMISSION CONTROL  DIFFERENTIAL PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89481B 1.INSTALL DIFFERENTIAL PRESSURE SENSOR

a.

Install the differential pressure sensor to the sensor bracket with the nut.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the vacuum transmitting hose assembly to the differential pressure sensor and slide the clip to secure it.


c.

Connect the differential pressure sensor connector.