Home › Audio / Visual / Telematics › TELEMATICS › MAYDAY SWITCH › from 2019.09
RM32K0E _56 Audio / Visual / Telematics _084041 TELEMATICS _0404728 MAYDAY SWITCH A

TELEMATICS  MAYDAY SWITCH  REMOVAL  


PROCEDURE

Hide 86750A 2.REMOVE MAYDAY SWITCH ASSEMBLY

a.
E357307

Disconnect the connector.


b.
E357308

Disengage the claws to remove the cover.


c.
E357309

Using a T10 "TORX" driver, remove the 2 screws.


d.

Disengage the guides to remove the mayday switch assembly from the bezel.