Home › Audio / Visual / Telematics › TELEMATICS › MAYDAY BATTERY › 2019.09–2022.01
RM32K0E _56 Audio / Visual / Telematics _084041 TELEMATICS _0404729 MAYDAY BATTERY A

TELEMATICS  MAYDAY BATTERY  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the mobilephone battery removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedure Effect/Inoperative when not Performed Link
Telematics transceiver Register vehicle information Emergency call service (Click here)
Mobilephone battery Reset mobilephone battery condition

PROCEDURE

Hide 86741A 1.REMOVE TELEMATICS TRANSCEIVER

Hide 86742 2.REMOVE TRANSCEIVER COVER

a.
E426308C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Disengage the claw and guides to remove the transceiver cover as shown in the illustration.


Hide 86725 3.REMOVE MOBILEPHONE BATTERY

a.
E426310

Disconnect the connector.


b.

Remove the mobilephone battery.