Home › Engine / Hybrid System › M20A-FXS (ENGINE CONTROL) › KNOCK SENSOR › from 2019.09
RM32K0E _51 Engine / Hybrid System _083960 M20A-FXS ENGINE CONTROL _0404842 KNOCK SENSOR G

M20A-FXS ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK SENSOR

a.
A171218C11
0.094,0.094 0.406,0.25 0.313,0.156 10 false *a
*a Component without harness connected
(Knock Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 25°C (77°F) 120 to 280 kΩ


If the result is not as specified, replace the knock sensor.