Home › Engine / Hybrid System › M20A-FXS (ENGINE CONTROL) › AIR FUEL RATIO SENSOR (for Sensor 1) › from 2019.09
RM32K0E _51 Engine / Hybrid System _083960 M20A-FXS ENGINE CONTROL _0404843 AIR FUEL RATIO SENSOR(for Sensor 1) G

M20A-FXS ENGINE CONTROL  AIR FUEL RATIO SENSOR(for Sensor 1)  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

a.
A252482C04
1.938,1.135 2.583,0.635 false 1.542,1.135 0.906,0.646 false 1.542,1.521 0.896,1.729 false 0.302,0.115 0.667,0.292 0.365,0.177 10 false *a 2.656,0.552 3.146,0.74 0.49,0.188 10 false HA1A 0.667,0.563 1.104,0.823 0.438,0.26 10 false +B 0.49,1.656 0.854,1.844 0.365,0.188 10 false A1A-
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.